- Combos/Systems (4)
- Headlights (7)
- Taillights (6)
- Show More Brands
- Show Fewer Brands
Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours
With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)
Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately
With the Stix Switch 2-Pack, your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple, long press of the power button. So, if you need extra light up front, more visibility at the rear, or a traditional front/rear combo, the Stix Switch 2-Pack delivers. - 2 to 20-hour runtime - Headlight or taillight—you decide - Fresnel lens for maximum visibility in all directions - Red/Green battery charge level indicator - Three white modes: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens) - Five red modes: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays - Additional mounting options available (sold separately)
The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders
The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system
Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.
Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator, and easy USB rechargeability, it's the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Swift Features - Lumen Output: 500 - 5 Modes with Run Times: 1:40 – 32:00hrs - Charge Time: 1:45 / 3:00hrs - Weight: 82g - Battery: Li-Po - Low Battery Indicator - 500 lumen super compact and bright taillight - Water / Dust Resistant IP64 Rated Swift Run Times - Low—10:00h at 150 Lumens - Med—3:40h at 250 Lumens - High—1:40h at 500 Lumens - Flash—12:30h at 500 Lumens - Walk—32:00h at 30 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 1:30 – 10:30hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
Nip 800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Nip features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6-18V on-board batteries such as Shimano or Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. Key features: - 800 lumen headlight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified
- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g
Page 1 of 1